Dobrý den, nedávno jsem si zakoupil arduino uno a dnes se mi při práci objevila následujíci chyba:
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x00
Zkontroloval jsem nastavení desky, portu, aktualizoval ovladače a stále nic. Nevíte co s tím ?
resp=0x00 chyba
-
- Příspěvky: 17
- Registrován: 03 bře 2018, 21:38
- Reputation: 0
Re: resp=0x00 chyba
Vypadá to, jako by jsi arduino neměl ve flash módu, zkus propojit GPIO 0 na zem. Případně zkusit jiný kabel, občas se to stává i kabelem.
Kdo je online
Uživatelé prohlížející si toto fórum: Bing [Bot] a 12 hostů